2000W/45 90V/120/230VAC Wind Grid Tie Micro Inverter for Wind Turbine/ monitor for wifi

2000W/45 90V/120/230VAC Wind Grid Tie Micro Inverter for Wind Turbine/ monitor for wifi
  • Продавецoaklandraidersvsbuffalobills.us
  • Список ценUS $549.09piece
  • Продажная ценаUS $549.09piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,6 (726)

Oписание продукта

600W Grid Tie Inverter On Grid Inverter, 22-50VDC Waterproof IP65 MPPT Pure Sine Wave Inverter 36V with Communication Function


System Function

Power line carrier-current communication(this is optional function)

By using electric power as a carrier of AC alternating current, can modulate high-frequency and carrier frequency (60KHz) in AC wire transmission and can achieve the communication/ newsletter between inverters or between inverter and computer. And it can transfer the power data . Also monitor all functions of inverter.
1. Carrier frequency:60KHZ(Frequency customizable);

2. Interface way:TTL level serial interface;

3. Carrier rate:300BPS;

4. Serial rate:9600PS(Can customize according to customer\'s request); 

5. Modulation mode:FSK+DSSS;            

6. Newsletter distance:400m;



In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power.


Wide voltage input(22-50VDC)

1. DC voltage input:22~50VDC;

2. Second level power variable voltage conversion.


High-frequency two-way and  one-way grid function

1. High frequency direct modulation, AC half wave synthesis;

2. Two-way grid means: Load consume directly. And can reverse AC current transmission.


Kinds of frequency output function

1. It can apply to 50Hz and 60Hz frequency of AC;

2. Frequency range: 45Hz ~ 64Hz;


Directly connected to the solar panels (do not need to connect the battery)


AC 0 angle with high precision auto-detection

High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.

1. AC phase shift: < 1%;

2. Over-zero protection: 0.2 VAC; 

3. AC switching: 50Hz / 60Hz.


Synchronous High-frequency Modulation

1. Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz); 

2. Synthetic way: MOSFET full-bridge;     

3. High frequency: 50KHz.


Pure Sine Wave Output

Use SPWM directly to make pure sine wave output.

1. Output waveform: Adopt complementary MPPT to push-pull pure sine wave;

2. Generate means: enhancement-mode SPWM.


Power Automatically Locked (APL)

automatically powers locked in maximum power point, made output more stable.


Constant Current, Constant Power

constant current and output power, without any overload,  over-current phenomenon.


Exactly and  timely automatic Island Effect Protection


High-Frequency High Conversion Rate

Adapt high frequency converter, the output more efficient.


Maximum PowerPoint Tracking (MPPT)

high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency.


Stack using

Such as: 4 micro inverter of 600W stacking can achieve 2400W.  the number of the stacking is unlimited.


DC input

Input voltage range: 22V to 50V, recommend using the power more than 600W and the standard voltage of 36V PV panels. Suggestion making the PV in parallel.


Two AC output

220VAC: 180V - 260V; 110V AC: 80V - 160V;

50Hz/60Hz Auto-work.


Specification Parameters Table

Model WVC-600W

Recommended Input Power 

Recommended Used PV Module600W / Vamp>34V / Voc<50V

Max DC Input Voltage 

Peak Power Tracking Voltage 22-45V

Operating Voltage Range 

Min / Max Start Voltage 22-50V

Max DC Short Current

Max Input Working Current 25A

Output Technical Parameter 

Output Peak Power 600Watt600Watt

Rated Output Power

Rated Output Current 4.58A 2.39A

Rated Voltage Range 

Rated Frequency Range57-62.5Hz47-52.5Hz

Power Factor 

Maximum Unit Per Branch Circuit6pcs(single-phase)12pcs(single-phase)

Output Efficiency 

Static MPPT Efficiency 99.5%99.5%

Max Output Efficiency 

Average Efficiency 91.2%93.1%

Night Power Loss 

<50mW Max <70mW Max 
Total Xie Wave Distortion <5%<5%


Ambient Temperature Range -40+60°C

Operating Temperature Range

Net Weight1.58Kg

Gross Weight

Size (L×W×H)290×200×38mm

Package (L×W×H)

InstallationFix the inverter on the PV Holder


Communication Way Power Line Carrier 

Power Transmission Way 

Reverse Transfer, Load Priority Use
Monitoring SystemFree all the lifetime

Electromagnetic Compatibility 

EN50081.part1  EN50082.part1
Grid Disturbance EN61000-3-2     EN62109

Grid Detection 

DIN VDE 1026  UL1741
CertificatesCEC, CE Certificates, Country Patent Technology 


Installation of Micro Inverter

Step 1. Installation for fixed the inverter on the PV holder with the screws attached is as following:

Step 2.  Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative. Show below:

Step 3. Open the waterproof cap on AC output side of the micro  inverter, then plug  to AC power  line. Show below:

Step 4. Plug the AC output line to main AC cable;


Step 5. Repeat the fir st step to the third step to complete the installation of micro  inverters; 


Step 6. Finally, please connect the AC main cable to the utility grid   to run renewable energy  and saving $$$!


Optional Communication Monitoring System Diagram 



Monitoring Equipments(If you are interested in them, you need to additionally buy from us), please "click here "


LED Display

1. Red light 3 second:

while device starts , then in working condition;


2. Green flash fast:

MPPT searching


3. Green flash slow:

MPPT + searching;


4. Red flash slow:

MPPT - searching;


5. Green lights on 3s and off 0.5s:

MPPT locked;


6. Red light steady:

a. Islanding protection

b.Over-temperature protection;

c.Over / low AC voltage protection;

d. Over / low DC voltage protection;

e. Fault. 



LED flashing in the process of being working condition:inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT  + searching) / Red LED flash slow (MPPT - searching) / Red LED lights on 3s and off 0.5s (MPPT locked).